Salient Features:
- We offer two air gauging systems -Module
1A and Module 2A- giving the most economical solution to
your inspection problems on the shop floor.
- High pressure system - High
speed of response and self cleaning of gauging area ensures
accurate reading of size,taper and ovality at a time.
- Non-contact Gauging - Long
life due to minimal frictional wear.
- Two Setting Masters - Ensures
correct magnification of reading at all times.
- System Pressure Check Gauge
- Provides a constant check on the system pressure i.e 3-4
bars (43-58 psi ), regulated by a high precision regulator
built in to the unit.
- For Dual dimension checks,
'Duplex' (2 in 1) unit is available.
- For sequential gauging, 3 Channel
Unit is also available.
- Minimum line pressure required
5 bar. ( 73 psi )
- Air consumption 46 LPM
|
|
|
|
|
| ID Range |
Module |
| 1.5-6 mm |
2A |
| 6-200 mm |
1A |
|
| |
Salient Features:
- Quick and easy checking of bore size, taper & Ovality
- With extensions to check deeper bores
- Can be supplied to check though or blind bores
- Can be supplied with multiple jets
- Can be supplied specially to suit components.
|
|
|
|
|
| OD Range |
Module |
| 2-6 mm |
2A |
| 6-130 mm |
1A |
|
| |
Salient Features:
- Two Jet Air Ring Gauge to check outside diameter, Taper & Ovality
- Three jet Air Ring Gauge for detecting Tri-lobed effect with 3-jet Air Ring gauge.
- Tungsten Carbide lined Air Rings for checking hardened jobs.
|
|
|
|
|
|
|
