|
|
Salient Features:
- Twin channel gauge units with
selectable probe combinations of +A, -A, +B, -B, +A +B,
+A -B, -A +B, -A -B
- Inch and Metric measuring ranges.
- RED, GREEN and YELLOW tolerance
lamps for UNDERSIZE-OK-OVERSIZE indication
- RS232C data output
- Externally accessible calibration
and zero controls.
- Comprehensive outputs for further
processing.
- Compatible with Half-bridge
and LVDT type inductive measuring probes.
- Sturdy, Ergonomic design, suitable
for shopfloor environment .
- Splashproof and sealed against
dust.
- Add-on Modules available for
further processing.
- Mains selection of 220/110
VAC
|
|
|
 |
Dual scale
3-0-3 and 10-0-10 galvanometer with enclosed
tolerance pointers. |
|
5 Metric and 5 Inch
ranges |
 |
|
| METRIC
RANGES: |
±10, ±30, ±100,.±300 and
±1000 microns |
| Resolutions:
|
0.5, 1, 5 and 50 microns |
| INCH
RANGES: |
±0.0003, ±0.001, ±0.003,
±0.01 and .±0.03 inch |
| Resolutions:
|
0.00001, 0.00005. 0.0001,
0.0005, and 0.001Inch |
|
|
|
|
|
|
|
|
Ability
to input absolute values.
Program Keypad |
|
|
| METRIC
RANGES: |
±300 and ±3000 microns |
| Resolutions:
|
0.1, 1 microns |
| INCH
RANGES: |
±0.03 and ±0.3 inch |
| Resolutions:
|
0.00001, 0.0001 inch |
|
|
|
|
|
|
254mm/10
Inch tall analogue RED LED bargraph display
with 100 segments |
|
2 position bargraph
intensity selection |
|
5 Metric and 5 Inch
ranges. With Tolerance markers as well as Tolerance lamps.Can be banked for Multi-gauging application |
|
|
| METRIC
RANGES: |
±10, ±30, ±100,.±300 and
±1000 microns |
| Resolutions:
|
0.2, I, 2, 10 and 20 microns |
| INCH
RANGES: |
±0.0003, ±0.001, ±0.003,
±0.01 and ± 0.03 inch |
| Resolutions:
|
0.00001, 0.00002, 0.0001,
0.0002 and 0.001 inch |
|
|
|
|
|
The
new generation of Electronic units open up a new
line of gauging applications with the ability to
do programming to suit a wide variety of applications
Analog and Column display have basic features same
as the standard units and in addition: |
| |
|
|
Selectable ranges
in Metric and Inch reading through Standard Menu. |
|
Tri colored Bargraph display
for 2045 |
|
Classification in uniform
as well as non-uniform grades. |
|
Static
and dynamic measurement mode |
|
Auto and
Manual calibration. |
|
Programmable
Tolerance and control limits |
|
RS 232
output for PC connectivity or feedback to Machine
tools for Auto Tool Correction. |
|
|
| |
|
|
|
