Welcome to Baker Gauges

Enquiry | Contact Us | Sitemap

Baker Gauges India Private Limited

Baker Home : Services : Calibration : BMI

	Our Services
	Calibration

	Repair and Maintenance

Salient Features:

Laboratory accredited by NABL for conformance to ISO 17025.
Laboratory's dedicated air conditioning plant runs for 24 hours a day.
Temperature of the laboratory controlled within 20°C ± 1°C automatically.
Highly precision and reliable measuring equipment and reference masters traceable to national/international standards
Well trained and experienced laboratory staff.
Entire set up geared up to give you fast deliveries

SIP-550M

1) Parameter: Internal & External Diameter
2) Equipment: SIP 550M directly traceable to NPL India
3) Least Count: 0.01 micron
4) Range: 1-315 mm ID ( maximum admit OD 550 mm, Max weight 30 kg )
5) Uncertainty in measurement: ± 0.001 mm for rings upto 100 mm ID; ±0.0013 mm for rings having ID above 100 mm upto 315mm ID (Uncertainties calculated at 95% confidence level with the coverage factor k=2)

Sigma Comparator

1) Parameter: External Diameter
2) Equipment: Sigma Comparator directly traceable to NPL India
3) Least Count: 0.5 micron
4) Range: -1-200 mm OD
5) Uncertainty in measurement: ± 0.001 mm for masters upto 100 mm OD ±0.0015 mm for masters having OD above 100 mm upto 150 mm ± 0.002 mm for masters having OD above 150 mm upto 200 mm (Uncertainties calculated at 95% confidence level with the coverage factor k=2)

Slip Calibrator

1) Parameter: Slip Gauge Size and Grade ( steel slips of grades 0, 1 and 2 only )
2) Equipment: Gauge Block Tester EMP II, Make: Steinmeyer, directly traceable to NPL India
3) Least Count: 0.01 micron
4) Range: 0.5-100 mm Slip Size
5) Reference Standard: KOBA make steel slip gauge box traceable to international length standard ( PTB Germany )
6) Uncertainty in measurement: ± 0.15 micron ( from 0.5mm upto and including 20 mm ) ± 0.20 micron ( from 20 mm upto and including 75 mm ) ± 0.23 micron ( from 75mm upto and including 100 mm ) (Uncertainties calculated at 95% confidence level with the coverage factor k=2)

Talyrond 210

1) Parameter: Roundness measurement by the least square circle method
2) Equipment: TR210, Make: Rank Taylor Hobson
3) Resolution: 0.06 micron
4) Range: Upto 500 mm ( Max. weight 20 Kg )
5) Uncertainty in measurement: ± 0.1 micron (Uncertainties calculated at 95% confidence level with the coverage factor k=2)

Surtronic 4+

1) Parameter: Surface Finish in CLA
2) Equipment: Surtronic 4+, Make: Rank Taylor Hobson
3) Least Count: 0.01 micron
4) Range: 0.03- 6 micron CLA
5) Uncertainty in measurement: ± 0.015 + 6% of actual value in microns (Uncertainties calculated at 95% confidence level with the coverage factor k=2)

Universal Taper M/c

1) Parameter: Taper angle of an external taper cone
2) Equipment: OD Taper Measuring Machine; Make: Knauthe, Germany directly traceable to NPL, India
3) Least Count: 0.5 micron for diameter; 0.1 micron for height
4) Range: Taper diameters ranging from 4-120 mm
5) Uncertainty in measurement: ± 2' 30" (Uncertainties calculated at 95% confidence level with the coverage factor k=2)

Dial Gauge Calibrator

1) Parameter: Errors in dial gauge travel
2) Equipment: Universal Dial Gauge Calibrator; Make: Steinmeyer traceable to NPL India
3) Least Count: 0.1 micron
4) Range: Dial gauges upto 25 mm /1 inch travel
5) Uncertainty in measurement: ± 2.5 micron (Uncertainties calculated at 95% confidence level with the coverage factor k=2)

Calibration Labrotory

Salient Features:

65 Cubic Meters of Controlled environment houses the calibration equipment
20 +/- 1 degree Celsius with extremely low Temperature gradient.
Humidity 50 +/- 5 % - To achieve this the environment is humidified and then de-humidified to the correct value.
Better than 1,00,000 Class Dust Count (0.0005mm particle size) with online Electrostatic Precipitator with Automatic cleansing.
Illumination is maintained 1000 Lux at the point of measurement.

Care taken to ensure the above environmental parameters:

Air velocity is maintained at 30 feet per minute to ensure uniformity of temperature. 60% air inlet @ of 12,000 cfm of air with 15% fresh air continuous intake.
Extensive insulation against external ingress of heat/cold and humidity
Antistatic Flooring, Aprons and anti-flaking paint used to minimise dust.
Double glazed glass vacuumised partitions used to prevent heat and sound conduction.
Trench all around to avoid surface level high frequency vibrations from the shop floor. Extremely rigid tables with Granite Surface plates used for keeping the Calibration equipment with anti vibration pads to ensure vibration level is maintained with in 0.025mm peak to peak.
Most importantly the environment is maintained 24x7, 365 days a year.

Our equipment consists of:

Slip Gauge or Gauge Block Calibration Center from Feinmess, Germany with a unique patented handling system for the slips during calibration to avoid even the minutest of scratches.
SIP 550M Computer aided Universal Calibration and Measuring Machine with a finest resolution of 0.00001mm and two Carl Zeiss Universal Horizontal Metroscopes for calibration of Masters.
Rank Taylor Hobson Talyrond 210 Roundness measuring machine
Rank Taylor Hobson Surtronic 4 Plus surface finish analyzer.
Sigma high precision electronic outside diameter calibration comparator.
DEA make Swift 3 Dimensional Co-ordinate Measuring Machine.
Basic standards – Grade K (Koba), 1 & 2 Slip Gauges.

Set of Cylindrical masters for 1mm to 450mm inside diameters and 1mm to 500mm external diameter
We are maintaining Traceability to National & International Standards as an ongoing exercise with all our standards being periodically calibrated from either DKD – Germany or Metas – Switzerland or from NPL – UK and Delhi.

Well-trained and experienced laboratory staff.
Entire set up geared up to give you fast deliveries
The laboratory is NABL accredited inline with ISO/IEC 17025-1999 – General Requirements for the Competence of Testing & Calibration Laboratories with following Capabilities:

Back	Do you have any question?