| |
| |
| BAKER bore gauges allow rapid and accurate
checking of bores for size, Ovality and taper as also wear of
bores like Engine Cylinder bores etc. in the workshop or inspection
room. All bore gauges operate on the proven principle of two
diametrically opposite measuring points, one fixed and one moving
with a spring loaded centralising shoe. To check the actual
size of bore, the gauge must be set to size with a bore master
(Master Setting Ring) of known diameter which is close to the
size to be measured. Inserted into the bore, it is necessary
to "rock" the gauge slowly to locate its measuring
axis to the bore shown by the point of reversal of the indicator
hand. The reading at that point is the deviation from set normal
size. A range of interchangeable extension rods allows a single
instrument to cover wide range of bore sizes. |
 |
Salient Features:
- Small bores from 10mm to 18mm
- High wear resistance due to carbide-tipped
stationary and moving anvils.
- Extra wide bridge ensures automatic centering
in the bore. Self-centralising feature of this
bore gauge ensures that the measurement can
be done with minimum of skill.
- Furnished in a sleek wooden case containing
measurement anvils and extension rods with necessary
tools.
|
| |
| 10-18 mm Range (0.4"-0.7") |
| Type |
Reading |
Depth |
Graduation |
| J603 |
0.01 mm |
100 mm |
0.50-0 |
| J609 |
0.001 in |
100 mm |
0.50-0 |
|
|
| |
| Measurement and transfer
of heights, scribing and making of work pieces and other measurements
like run outs, center distance etc. By using a Lever Type
Dial Indiacator in Tool Room and Standards Room. |
| 
Each caliper carries a calibration
certificate giving actual values |
| Salient Features:
- Robustly constructed, Stainless Steel column
with clearly marked scale graduation.
- A clear Multifunction Digital LCD display
runs smoothly on the Analog vertical scale.
- Fine adjustment with lock provided for ease
of setting.
For easy and precise maneuverability the base
has a specially designed thumb grip.
- Carbide tipped scriber
- Functions consist of Power ON/OFF, bsolute/Incremental
mode, mm/inch, Preset, Hold, and Tolerance setting.
- Capacitive measurement system.
- Maximum reading speed 1m/s
- Powered by easily replaceable Silver Oxide
Battery.
- Operating environment – Temperature
5 to 45 degrees C at < or = 80% Humidity.
|
| |
| Model |
BDHG300 |
BDHG600 |
| Range |
300 mm / 12 inch |
600 mm / 24 inch |
| Resolution |
0.01 mm /0.005" |
0.01 mm /0.005" |
| Accuracy
|
±0.004 mm |
±0.005 mm |
|
|
|
 |
Salient Features:
- Accuracy confirming to DIN 863/1, DIN 40050/IEC
529.
- Carbide measuring faces.
- Protection level IP54.
- Each micrometer supplied with Calibration
Certificate
with actual values.
- Soft functional keys’ for maximum operation
comfort
- ON/OFF-Switch to ON/OFF battery power to digital
Micrometer.
- Set-For origin in absolute [ABS] mode.
- Absolute mode {ABS]-Allows setting of an
origin
[starting point] to be used as reference in
subsequent measurement [genrally set to closed
spidl e position]. Once set, the micrometer
will measure with reference to Itestrue position
from the origin.
- Comparative mode [INC]-allows the display
to be zero Set at point, for increamental comparison
Measurement.
- MM/INC- Measurement unit Metric/English [mm/inch]
- SR 44 battery, Auot Power Off.
- Power consumtion < =35 A
- Delivered in attractive sturdy box.
- Supplied with ball attachment free of cost.
- Real value for money.
|
| |
| 10-18 mm Range (0.4"-0.7") |
| Type |
Range |
Reading |
| DMIC 25-1 |
0-25mm |
0.001mm/0.0001” |
| DMIC 50-1 |
25-50mm |
0.001mm/0.0001” |
| DMIC 75-1 |
50-75mm |
0.001mm/0.0001” |
| DMIC 100-1 |
75-100mm |
0.001mm/0.0001” |
|
|
|
|
The
new generation of Electronic units open up a new
line of gauging applications with the ability to
do programming to suit a wide variety of applications
Analog and Column display have basic features same
as the standard units and in addition: |
| |
|
 |
Selectable ranges
in Metric and Inch reading through Standard Menu. |
|
Tri colored Bargraph display. |
|
Classification in uniform
as well as non-uniform grades. |
|
Static
and dynamic measurement mode |
|
Auto and
Manual calibration. |
|
Programmable
Tolerance and control limits |
|
RS 232
output for PC connectivity or feedback to Machine
tools for Auto Tool Correction. |
|
|
| Micrometer
Head with Non-Rotating Spindle |
 |
Micrometer Head
with Non-Rotating Spindle available in ranges 0-10mm,
0-25mm and 0-50mm.
Salient Features:
- Pitch is 0.5mm per revolution.
- Due to Non-Rotating Spindle;
a) Torque is eliminated.
b) Wear at the contact point
is eliminated.
- Stainless Steel Spindle for rust prevention.
- Robust design withstands the toughest workshop
conditions.
- Error-free reading due to deep Laser Marked
scale divisions.
- All models are available with standard flat
tips.
- Spherical tip can be provided on request.
- Error limits according to DIN 863.
|
| Range 0-10mm |
| Type |
Range |
Reading |
| HPMM1-10 |
0-10mm |
0.01mm |
|
| |
|
| Micrometer
Head with Non-Rotating Spindle |
 |
| Range 0-10mm |
| Type |
Range |
Reading |
| HPMM1-25 |
0-25mm |
0.01mm |
|
| |
|
| Range
0-50mm |
 |
| Range 0-10mm |
| Type |
Range |
Reading |
| HPMM1-50 |
0-50mm |
0.01mm |
|
MICROMETER HEAD OF ANY RANGE
CAN BE SUPPLIED ACCORDING TO THE CUSTOMER'S REQUIREMENTS.
|
|
| |
