Relay
It consists of 2 relays either of which operates for oversize & undersize condition of the component under inspection.Both relays remain OFF when the component size is within the tolerance limits.Current carrying capacity is 5 Amps.
Total Light
This module reduces the operator fatigue where multidimensional checking is done using multiple gauging modules. If all the dimensions of a component are within limits then green light glows indicating conformance. Operator's time and efforts are saved because he does not have to monitor every gauging module. On the other hand, if one or some of the bores are undersized or/and shaft diameters are oversize then it indicates rework condition and yellow light glows. However, if one or more bores are oversize or/and shafts are undersized then it indicates rejection and red lamp glows.
Light Grading
Light grading module can sense various grades (up to 10 grades) and indicate by lighted lamp against the particular grade.Two extreme lamps for oversize and undersized components are also provided. |
